can your kitchen scale do this trick? – ESP8266+Load Cell+MQTT

Ever since we had changed our daily diet we started to weigh everything we eat or cook. Like everything.

Quickly we found that those kitchen scale you can cheaply buy are either not offering the convenience we are looking for or regularly running out of power and need battery replacements.

As we already have all sorts of home automation in place anyway the idea was born to integrate en ESP8266 into two of those cheap scales and – while ripping out most of their electronics – base the new scale functionality on the load cells already in the cheap scale.

So one afternoon in January 2018 I sat down and put all the parts together:

ESP8266 + HX711 + 4 Load Cells
my notes of the wiring… this might be different for your load cells…

After the hardware portion I sat down and programmed the firmware of the ESP8266. The simple idea: It should connect to wifi and to the house MQTT broker.

It would then send it’s measures into a /raw topic as well as receive commands (tare, calibration) over a /cmd topic.

Now the next step was to get the display of the measured weights sorted. The idea for this: write a web application that would connect to the MQTT brokers websocket and receive the stream of measurements. It would then add some additional logic like a “tare” button in the web interface as well as a list of recent measurements that can be stored for later use.

the web app. I am not a web designer – help me if you can! ;-)

An additional automation would be that if the tare button is pressed and the weight is bigger than 10g the weight would automatically be added to the measurements list in the web app – no matter which of the tare buttons where used. The tare button in the web app or the physical button on the actual scale. Very practical!

Here’s a short demo of the logic, the scale and the web app in a video:

You can grab the sourcecode for the Arduino ESP8266 firmware as well as the source code for the web application here.

fonts for your programming needs

We are looking at our screens more and more time of the day and most of that time we are reading or writing text. Text needs to look pretty for our eyes not to get sore – apart from the obvious “being able to tell what letter that is” there is a big portion of personal taste and preference when it comes to the choice of the font.

Most of the texts I am writing benefit from monospaced fonts.

This blog celebrates monospaced fonts for programming.
So many fonts have popped up in recent years.

Of course there’s a nice page available that previews the fonts right in your browser: